Growers Network Staff

December 5, 2017 3 min read
December 5, 2017
3 min read


Do you want to be part of our private, professional community?
Join Now

In this contributor article, Trevor Wasmund of AgriScience Labs discusses chromatography and how it's used to measure cannabinoid potency.

Trevor Wasmund of AgriScience Labs

The following is an article produced by a contributing author. Growers Network does not endorse nor evaluate the claims of our contributors, nor do they influence our editorial process. We thank our contributors for their time and effort so we can continue our exclusive Growers Spotlight service.

Testing for Potency

Cannabinoid potency tests are performed using High Performance Liquid Chromatography (HPLC) machines. Yay, article’s over!

Just kidding. What does an HPLC machine actually do?

Let’s start with the “C” in HPLC, which stands for chromatography. Chromatography is an analytical technique used to separate compounds based on their physical and chemical properties. Imagine you have a bunch of ping-pong balls with different weights. These ping-pong balls are sitting in a bucket that has an air pump attached to the bottom. As you turn on the air pump, the lightest ping-pong balls will start to fly out of the bucket. You can collect and count all the ping pong balls that fly out of the bucket, turn up the air pressure, and count the next group of ping-pong balls that fly out. If you continue turning up the air pressure, even the heaviest ping pong balls will fly out of the bucket.

Editor's Note : This is what I mentally pictured.

Chromatography essentially works the same way:

  1. The ping pong balls represent different cannabinoids and their respective weights. Different cannabinoids have different chemical and physical properties.
  2. The bucket represents an analytical column. Solvents travel up the analytical column and pull the cannabinoids with them.
  3. The air pressure represents the strength of the organic solvent. Stronger solvents will pull up cannabinoids at greater speeds.
  4. Counting the number of ping-pong balls represents the signal strength measured by a detector.

Diagram of an HPLC machine. On the right side, you see the separatory column and detector. On the left are the solvents. Image courtesy of Wikipedia.

Samples received here at AgriScience Labs are carefully weighed and extracted by our trained analysts. The extracted solutions are then injected into an HPLC instrument with a stream of organic solvent. The sample is pushed through the analytical column, separating the different cannabinoids based on their physical properties. The strength of the organic solvent is gradually increased and the separated cannabinoids are removed from the column at different times. The cannabinoid compounds are then sent to a detector which produces a signal strength that correlates with the amount of each cannabinoid. This data is then processed by our scientists to determine how much of each cannabinoid is present in your sample.

Of course, this is a simplification of the actual process for determining the amount of each cannabinoid, but hopefully you now have a general idea of how your samples are analyzed for potency.

Enjoyed the article? Want to continue the conversation?
Join Now

Do you want to receive the next Grower's Spotlight as soon as it's available? Sign up below!


  1. Want to get in touch with AgriScience Labs? They can be reached via the following methods:
    1. Website:
    2. Phone: 303-292-3800
    3. Email: [email protected]

Do you have any questions or comments?

Feel free to post below!

About the Author

Trevor is a Colorado native who earned Bachelor of Science degrees in chemistry and microbiology from Colorado State University. He brings over ten years of professional experience working in a variety of different positions ranging from the quality assurance of food products to analytical development of pharmaceutical test methods.

尚牛电竞视频结果官方 刀塔2在线下注 中国电子竞技视频赛事官方 战雄电竞公告v6.0 安卓版 im电竞游戏入口官网(im电竞游戏选手2.5.7) 浩方电竞赛表APP v2.5